Full-Flow 19mm Low Pressure Feeder Hose | £7.25/m - Minimum 5m | SKU: 30520

Professional Full-Flow Pressure Washer Feeder Hose. Genuine R+M Suttner-catalogued black synthetic-rubber industrial hose with a generous 19mm internal bore, selected for reliable low-pressure water supply to professional pressure washers. Our own practical test over a run exceeding 20 metres showed almost no reduction in delivered litres per minute in the setup tested. Longer runs may also be practical, but will depend on supply pressure, flow demand, layout and fittings.

Do not starve your pressure washer. A restricted inlet supply can reduce performance and contribute to cavitation or premature pump wear. Pair the hose with our Full Bore GEKA fittings to help avoid unnecessarily narrow connections and maintain the best flow the supply can deliver. Full-bore couplings do not guarantee a particular L/min flow rate.

• 19mm (3/4-inch) internal bore: tested by Performance Potions at over 20m with almost no observed flow-rate loss in the test setup.
• Heavy-duty 5mm wall: substantial industrial synthetic-rubber construction with abrasion- and ozone-resistant black outer cover; avoid knots, sharp folds, crushing or kinks.
• 20 bar maximum working pressure: for low-pressure inlet/feed applications, NOT for high-pressure washer outlet/discharge lines.
• -10°C to +60°C operating temperature: manufacturer-published service range; minimum bend radius is not confirmed by the supplier data available.
• Full Bore GEKA fittings recommended: combine 19mm hose with matching high-flow fittings to reduce connection bottlenecks; fittings are sold separately unless specified.

Price: £7.25 per metre. Minimum order: 5 metres (£36.25). Quantity represents metres ordered. Hose is supplied to the length ordered, subject to cut-length availability.

Important: The hose and all fittings must be used within the pressure and temperature rating of the lowest-rated component. Individual results will depend on the water source and pressure washer requirements.